雷火app-中国知名电竞赛事平台

When consumers buy automation equipment, they will find some problems, which make us very headache. We all know that there are many types of machinery, and we don’t know how to choose. The same is true for mixers, so the horizontal mixer is better. Vertical is good?

Horizontal mixers are more widely used than vertical mixers. They can be used for powders, granules, liquids, paste-like viscous materials, sheets, etc., while vertical mixers can be used for granules, powders, and sheets. Some materials can be used.

Horizontal mixers will be more efficient than vertical mixers, mixing time will be shorter and more uniform, and horizontal mixers are expected to be faster and cleaner than vertical mixers. However, the price of horizontal mixers will be much higher than that of vertical mixers, the service life of horizontal mixers is generally higher than that of vertical mixers, and the maintenance rate of horizontal mixers is lower than that of vertical mixers. Although the vertical mixer can also be used for mixing powder materials, it is recommended to use a horizontal mixer, because the vertical mixer may cause the material to enter the bearing and cause bearing damage when mixing powder materials.

The first point: the maintenance of the horizontal mixer is mainly the maintenance of the reducer part, so it is mainly used and maintained according to the above section.
The second point: The fixed foundation of the equipment needs to have sufficient rigidity to ensure no resonance and no shaking.
The third point: If the equipment has abnormal sound, temperature rise and shaking after starting up, it should stop running immediately and then check and deal with it.
Fourth point: For high-speed or large-capacity stirring operations, a positioning device should be installed at the bottom or middle of the shaft to reduce the probability of failure caused by the shaking of the shaft.
The fifth point: It is strictly forbidden to run empty vehicle before the propeller is completely immersed in the liquid, so as to avoid danger and equipment damage.
The sixth point: Before starting the mixer, please confirm that the foundation bolts and all screws are completely fixed.
Operation steps and precautions of horizontal mixer

Steps:
mixing equipment
1. Turn the function switch on 600/800W Hand Blender the column to the "automatic" position, press the start switch on the controller, and the entire operation program will automatically control the operation.
2. After the whole process is finished, it will stop automatically. If you need to stop in the middle of the operation project, you can press the stop button and then restart.
3. After pressing the start button, the display will start to show the time, slow, sand, fast, stop, fast, and the running indicators will flash on time.
4. During automatic control, all switches of manual functions must be turned to the stop position.

Operational matters:
1. Use a measuring gauge to detect that the gap between the blade and the pot wall should be 3mm~2mm. If the gap is out of tolerance, the upper and lower positions of the blade can be adjusted to reach the specified range.
2. After each use, the stirring blade and pot should be cleaned in time. The electrical parts should avoid violent vibration, keep away from water and high temperature, and pay attention to dust prevention.