英語
俄語
1. Align the middle rack vertically with the host, put it down, and assemble it in place.
2. Press the bottom of the juicing net against the motor wheel, and use both hands to make sure that the pressure is in place. Rotate it a few times to see if the frame is scratched. (lift up to dismantle)
3. Install the top cover and fasten the safety buckle. (When you buckle the safety buckle, please buckle the upper part of the buckle first, and then press down to buckle it in place. When removing it, it is just the opposite. Please open the bottom of the buckle first to open the safety buckle.)
4. Try the machine to see if it works normally. If the noise or vibration is too large, you can re-install it. Pressing the juicer in another direction will have a good effect.
5. First, peel and core vegetables and fruits, wash them for later use, and cut them into smaller ones if they are larger than the feeding opening.
6. Put the juice cup at the juice outlet, and put the large slag collecting bucket at the slag outlet.
7. Turn on the machine, put the fruits and vegetables into the juicer, press down with the push rod, and then squeeze out fresh and delicious juice.
8. After the juice is extracted, some juicers have an external juice-holding device for the convenience of customers, and it is necessary to pour the juice into their own cups.
9. Dump the pomace and prepare for cleaning.
Most of them can be used for stirring and juicing, and the squeezed juice is more nutritious and tastes better than the purchased juice.Cixi Jinkai Electric Co., Ltd. founded in 1997, is a professional China Wholesale Citrus Juicer Manufacturers and Citrus Juicers Suppliers. The factory is located near to Ningbo port and Shanghai port, covers an area of 15000 square meters, construction area of 35000 square meters. The company is setting the product design, development, production, manufacture and export in one. Our company also has the rich experience and innovative technology in the aspect of small household electric appliances production.The company mainly produces steam iron, Hand blender, coffee maker, juice maker, hair straightener and the series of more than 80 products.
how to maintain
1. After the juice is squeezed, disconnect the juicer from the power supply, and separate the cup barrel and the host. First clean the machine briefly, do not let the debris such as fruit residue in the machine condense, which will bring some trouble to the subsequent cleaning.
2. The cutter head can be disassembled if conditions permit, but the number of times should not be too frequent. The cutter head is easy to entangle the fibers or residues of fruits and other foods. The residue should be pulled out along the winding direction first, and then rinsed with water.
3. Don't throw away the old small brushes or toothbrushes at home. They have a unique effect when cleaning small places, so the cleaning effect is better.
4. If the knife head is used to grind meat, break the remaining steamed buns into steamed buns and put them into the mixer for mixing, which can effectively absorb minced meat, etc., and it is cleaner to clean.
5. The cleaning of the appearance is relatively simple, just wipe it with a rag. Remember not to rinse it with water or scrape it with a hard object to avoid surface damage. The base should not be immersed in water to avoid damage to the insulation part of the motor.
cleaning tips
1. It is the most common thing to use a juicer to grind fruit, and it is not easy to clean after the fruit is squeezed.
2. At this time, we can slowly pull out the fiber strips blocked on the cutter head of the juicer in the direction of the juicer. Don't use too much force!
3. Then clean, other parts can be scrubbed with a wire juicer ball, but not too hard.
About Us
